Description
Welcome to johnnystore
Description:
100 LED solar powered Christmas string lights four colors 5.5V140MA Solar panel 32.8ft 24pcs/lot
Available colors: red yellow blue white green four-colors.
Solar panel: 5.5V140MA
Rechargable battery: 1.2V1200MA/3pcs
Charging time: 6-7 hours
Working time: 20-24hours
LED: 100 PCS
Box Size: 152*118*98mm
Solar panel Size: 102*67 mm
String Length (From the first led to the last led): 10 Meters /32.8ft (led space: 10cm )
Lead wire (From the solar panel to the first led bulb): 3 Meters.
Total length: 13Meters/ 42.65ft
Notes:
Pink soalr fairy lights need to be customized, contact the seller to confirm before placing orders for pink lights.
1. Parts contained
a. Solar panel with LED strand : 1pc
b. Ground tube : 1pc
c. Pointed ground stake : 1pc
d. Wall bracket : 1pc
e. Screw and drywall anchor :2 sets
2. Installation
Solar light must be installed in a sunny location where it can receive maximum sunlight during daytime hours. Any cover that shades the solar panel will affect its ability to absorb sunlight and decrease the amount of brightness and duration of the LED lights and its function will be decreased. The selected location should not be near a nighttime light source such as a porch light, street light, etc as these lights might prevent the solar rope light from automatically turning on.
The electronic box can be positioned in the ground with the tube ad pointed stake or on a flat surface with the wall mounting bracket. Always place the tube or wall mounting bracket first, then attach the electronic box. Be sure the solar panel is pointed toward the light.
3. Operation
Charge battery for at least 8 hours before first use. Turn power switch to the ON position and the selection switch to the AUTO position when first activated.
NOTE : THE UNIT WILL NOT FUNCTION IF « MODE » IS SELECTED WHEN FIRST ACTIVATED.
a. AUTO
Turning selection switch to the AUTO position will cycle the lights through seven different flashing sequences :
1. Steady on,
2. Fast twinkling,
3. Slow twinkling,
4. Slow flashing in series,
5. Slow flashing in reverse series,
6. Fast flashing in series,
7. Slow flashing in series followed by reverse series.
Each sequence will last for approximately 10 seconds.
b. MODE
The user can select any of the above sequence for constant use. While in the AUTO position, turn the select switch to the MODE position when the desired sequence is illuminated. The light will continue to operate in the selected mode until the unit is either turned off or another sequence is chosen.
4. Battery changing
If your lights should begin to illuminate dimly or for shorter durations of time, you should replace the rechargeble batteries in the following way :
1. Unscrew 4 screws and remove bottom plate from the electronic box,
2. Replace the old batteries with new one.
Warning :
1. Be sure that battery polarity and voltage are correct (wrong polarity is dangerous),
2. Do not dispose of obsolete batteries, they should be recycled.
